Which servo brands do you repair?

Yaskawa Sigma-5/7, Mitsubishi MR-J2/J3/J4/J5, Siemens SINAMICS S120 and 611U, Delta ASDA-A/A2/A3/B2/B3, Panasonic MINAS A-series, Fanuc αi/βi, Bosch Rexroth IndraDrive, Allen-Bradley Kinetix, Omron G5/1S and legacy models. Component-level repair with warranty per service terms.

Can you repair the servo motor and encoder together?

Yes. We rebuild bearings, replace seals and brakes, re-solder feedback pigtails, restore absolute-position data on absolute encoders, and pair-tune the drive+motor combination on a dynamometer after any mechanical work.

What is servo tuning and do I need it?

Servo tuning matches drive gains to the load's inertia and stiffness. It's needed after any mechanical change (new gearbox, ballscrew, coupling), after replacing the drive or motor, or when you see hunting, overshoot, or resonance on the axis.

Do you handle CNC spindle motors?

Yes — spindle motor rewinding, thermistor replacement, rotor balancing, bearing replacement and encoder installation are core services.

How do I ship a servo motor for bench repair?

Call +91 91001 61605, log the fault, and we'll share our bench-repair address plus a packing checklist. Turnaround is typically 3–7 working days including functional testing per equipment requirements.

Servo Drive Repair, Motor Repair & Tuning

Overview

We service and repair servo drives and motors from Yaskawa (Sigma-5, Sigma-7, Σ-II), Mitsubishi (MR-J2, MR-J3, MR-J4, MR-J5), Siemens (SINAMICS S120, 6SN, 611U), Delta (ASDA-A, A2, A3, B2, B3), Panasonic (MINAS A4, A5, A6), Fanuc (αi, βi), Bosch Rexroth (IndraDrive), Allen-Bradley (Kinetix), Omron (G5, 1S) and more. Common jobs: encoder EEPROM corruption, resolver bearing failure, brake stuck-on, drive DC-bus fault, absolute-position loss, communication (SSCNET, EtherCAT, Mechatrolink, PROFINET) drop-outs, and drive-to-motor combination retuning after a mechanical rebuild.

Every job is backed by a repair warranty per service terms, functionally tested reinstallation, and a written service report. Call +91 91001 61605 for emergency breakdown support across Hyderabad, Telangana and pan-India.

Our Repair & Service Process

Fault Logging & Triage

Share the fault code, symptoms and equipment details on +91 91001 61605. We triage severity and dispatch accordingly.

Diagnostics

On-site or bench diagnostics isolate the root cause of the servo equipment — not just the symptom.

Repair Estimate

You receive a clear, no-obligation estimate before any chargeable work begins.

Component-Level Repair

Experienced engineers repair to component level using quality-matched parts and controlled soldering.

Functional Testing

Every unit is powered up and tested per equipment requirements before sign-off.

Installation & Commissioning

We refit, parameterise and commission on site, verifying the line runs to spec.

Warranty & Report

You get repair warranty as per our service terms and a written service report for your maintenance records.

Response Time & Turnaround

Service Level	Turnaround	Details
Emergency Breakdown	Rapid local response	Line-down support across Hyderabad & Telangana, subject to availability.
Standard On-site	Same / next day	Scheduled visit for diagnostics and field repair, subject to scheduling.
Bench Repair (Courier-in)	Typical 3–7 working days	Component-level repair with functional testing before dispatch.
AMC / Contract	Priority SLA	Agreed response windows under annual contract.

Warranty & Trust

Every job is backed by a repair warranty as per the service terms in your written report, transparent pre-approved estimates, and a written report for your CMMS. Clear diagnosis, transparent charges — just equipment that runs.